DIN輥筒式磨擦試驗機參考標準：

1. GB/T 9867-2008 idt ISO 4649:2002 硫化橡膠或熱塑性橡膠耐磨性能的測定(旋轉輥筒式磨耗機法)

2. ISO 4649-2002 硫化或熱塑橡膠.滾筒法進行耐磨損測定

3. DIN 53516-1987 生橡膠和彈性體的檢驗.磨損測法

DIN輥筒式磨擦試驗機規格參數：

1. 試樣規格：直徑=16mm，厚度=6～15mm

2. 滾輪規格：直徑=150±0.2mm，長度=460mm

3. 滾輪轉速：40±1r/min

4. 夾具橫向位移量：4.2mm/滾輪每圈

5. 試驗荷重：夾具=2.5N，砝碼=2.5N或5N

6. 磨耗行程預定：40m或20m

注：40m相當于滾輪84圈；20m相當于滾輪42圈

7. 磨耗速度：0.32m/sec

8. 試驗傾角：3°(試片支撐軸與滾輪垂直面夾角)

9. 砂紙規格：60#粒度，平均厚度=1±0.2mm

10. 測試方式：自轉/非自轉預設

11. 主機尺寸：約W700×D300×H300mm

12. 主機重量：約65kg

13. 電源要求：1∮ AC220V3A

DIN輥筒式磨擦試驗機儀器配置：

1. 主機1臺

2. 標準膠1片

3. 切刀1把

4. 吸塵器用戶自配

DIN輥筒式磨擦試驗機英文版

DIN Abrasion Resistance Tester

Model: SZ-6611B

This tester is used to determine the abrasion characters characters of elastomers, rubber, soft synthetics…etc. It^,s with characters of high efficiency, good reproducibility and easy operation.

Specifications:

1. Specimen: ?16mm, (D)6～15mm

2. Grip: 2.5N

Weight: 2.5N, 5N

3. Grip Lateral Displacement: 4.2±0.04mm/ Per rotation of drum

4. Dia. of Drum: ?(150±0.2)mm

5. Length of Drum:460mm

6. Speed of Drum: 40±1r.p.m.

7. Abrasion Path:40m/20m, Correspond to rotations of the drum

8. Abrasion Speed:0.32m/sec

9. Inclination: 3°angle between the shaft of specimen support and the vertical of the drum

10. Dimension: Approx W700×D300×H300mm+ Vacuum cleaner

11. Weight: Approx61kg